
Wheel Decon & Satin Dressing
High-performance braking systems shed microscopic glowing iron particulates that burn directly into your alloy wheel clear coat and brake calipers. We utilize laboratory-formulated, pH-neutral chemical chelating agents that react with metallic fallout—turning purple as they dissolve embedded brake dust without harming painted or carbon-ceramic hardware. Paired with non-sling satin UV tire nourishment and streak-free optical glass clarity.
How Embedded Brake Dust Causes Permanent Wheel Pitting
Brake rotors and pads reach temperatures exceeding 700°F during spirited driving. As brake pads wear, they release glowing microscopic iron filings that embed themselves into the clear coat of your wheel faces and deep inner barrels. Left untreated, moisture oxidizes this iron into rust, creating microscopic pits that permanently ruin expensive forged alloys.
Harsh acidic wheel cleaners used by cheap washes strip factory clear coats and etch aluminum brake calipers. Grand Duke Automotive uses advanced pH-neutral sodium thioglycolate chemistry that bonds specifically with iron ions, turning deep purple and turning solid metallic dust into a water-soluble rinse.
Brake Dust & Tire Care Standards
5-Stage Running Gear & Glass Sequence
Every spoke, lug nut recess, barrel depth, and glass pane receives surgical precision.
Chemical Iron Purge
pH-neutral iron remover sprayed onto cool dry wheels, reacting with metallic brake dust for 3–5 minutes.
Barrel & Caliper Agitation
Non-scratch wooly wands scrub the inner barrel depth, brake calipers, and behind spoke faces.
Lug Nut & Emblems Detail
Boar-hair detail brushes delicately clean lug nuts, valve stems, and center hub crests.
0-PPM Hydro Rinse & Dry
High-pressure deionized water flushes dissolved iron away. Blow dried with warm filtered air.
Satin Dressing & Glass
Dry-to-the-touch satin dressing nourished into rubber. Windows polished to optical crystal transparency.
Verified Wheel Transformations
Pristine wheel barrels, immaculate calipers, and rich satin tire finishes.






Wheel & Glass FAQ
Is your iron fallout remover safe for carbon ceramic brake rotors (PCCB)?
Yes. Our iron dissolution formulas are 100% pH-neutral and acid-free, fully approved for exotic vehicles equipped with Porsche Ceramic Composite Brakes (PCCB), Ferrari carbon ceramic, and BMW M Carbon rotors.
Will the tire dressing fling greasy residue down the side of my vehicle?
Never. We use water-based, dry-to-the-touch satin emulsions that absorb completely into the tire rubber pores. After a 10-minute dry time, you can drive at highway speeds with zero sling.
Can you ceramic coat my wheels and brake calipers?
Yes! We offer high-temperature 9H wheel and caliper ceramic coatings that resist heat up to 1200°F, preventing brake dust from bonding and making wheels washable with just water pressure.
Why do car windshields develop a hazy interior film?
Modern automotive interiors contain plastics and vinyls that slowly release vapor gases under sunlight (outgassing). This creates an oily film that causes nighttime headlight glare. Our optical glass polish removes this film completely.
Restore Wheel Barrels & Optical Glass Clarity
Book your Wheel Decon & Satin Dressing online or request a complimentary estimate.
Trusted Across Premier Automotive Engineering
Custom paint correction chemistry, ceramic coatings, and leather care formulated specifically for factory clear coats and exotic finishes.
































